Documentation made available quickly and It is good quality. Thanks.
Tekstowy podgląd strony 6 (kliknij aby zobaczyć)
CFD-E95 SECTION 2 GENERAL
Basic Operations
This section is extracted from instruction manual.
Playing a CD
3
1, 2
Use these buttons for additional operations
u x ZPUSH OPEN/CLOSE VOLUME +, � Jog dial POWER
To adjust the volume
Do this Press VOLUME +*, � (VOL +, � on the remote). Press x. Press u*. Press the button again to resume play after pause. Turn the jog dial clockwise. (On the remote, press >.)
Connect the supplied AC power cord.
stop playback pause playback
1
Press ZPUSH OPEN/CLOSE down to open the CD compartment and place the CD on the CD compartment.
go to the next track
go back to the previous track Turn the jog dial counterclockwise. (On the remote, press ..)
With the label side up
remove the CD turn on/off the player
Press ZPUSH OPEN/CLOSE. Press POWER.
2
Close the lid of the CD compartment.
* The button has a tactile dot.
3
Press u. The player turns on (direct power-on) and plays all the tracks once.
Display
Track number
Playing time
4
5
Listening to the radio
1
2
Use these buttons for additional operations
POWER MODE
Basic Operations Basic Operations
VOLUME +, �
Connect the supplied AC power cord.
Tip If the FM broadcast is noisy, press MODE until Mono appears in the display and the radio will play in monaural. Display
To adjust the volume turn on/off the radio
Press VOLUME +*, � (VOL +, � on the remote) POWER
1
Press RADIOÂ¥BANDÂ¥AUTO PRESET until the band you want appears in the display (direct poweron).
* VOLUME + has a tactile dot.
To improve broadcast reception Reorient the antenna for FM. Reorient the player itself for AM.
2
Hold down TUNE + or TUNE � until Indicates an FM stereo the frequency digits begin to change broadcast in the display. The player automatically scans the radio frequencies and stops when it finds a clear station. If you can�t tune in a station, press the button repeatedly to change the frequency step by step.
