0.25 MHz steps using � � or � � buttons, you can select the 224.25MHz .When you type and select the frequency the corresponding st tion will be displayed. , a �To store the st ation to the programme number selected, select �Store� option using � � or � � button and then press � � or � � button to store it. �Now as you had selected the �Frequency Search�, the tuning mode of the program is stored as Frequency Search Mode. Manual Setup
�Press the GREEN BUTTON on the remote control this will insert the channel shown on the screen into that programme number position. The channel that was occupying that position will be moved down one and the position from where the selected channel was moved from will be filled by the channel below. APS (Automatic Programming System) The APS menu appears when you switch on your for TV the first time.
APS automatically tunes your TV into the TV channels The Manual Setup Menu displays the programme received in your area. names and numbers. You can use this menu to delete If you wish to run theAPS at another time you will have or insert a channel and to auto store the programmes. to do the following. This menu can be accessed directly via the� � INFO �Press the BLUE button on the remote control handbutton provided the TV is not already displaying a menu. set this will display the Install menu then select The Manual Setup Menu can be reached viaInstall in MANUAL SETUP using the � � or � � buttons. the Main Menu. Next press either of the � � or � � buttons. Press the Blue button on the remote control handset this �You are now in the MANUAL SETUP menu. will display the Install menu then selectManual Setup �Press the BLUE button on the remote control handusing the � � or � � buttons. Next press either of the set. This will select AutoTune and start APS. (Press� � or � � buttons. ing the TV button on the remote control can stop this When you have entered theManual Setup all the prooperation.) gramme names and numbers will be displayed on the When APS has finished a able of all the channels tuned t screen. Programme number one (1) will be in red and in will be displayed on the screen. If you are not happy flashing while all the others are in white. By using the with the line up of the channels this can be changed. � � or � � buttons you can move the flashing display Please refer to the section on how to delete and insert to select another programme number and name. a channel from a programme number located in the Pressing the RED button on the remote control will reMANUAL SETUP section. tune the channel on the flashing programme number.
To delete a channel from a programme number: �To move the red flashing display on to the channel you want to delete. �Press the YELLOW BUTTON on the remote control. Now the channel will be deleted and all the other channels below this programme number will be moved up one position. To insert a channel into a programme number: �Move the red flashing display on to the channel you want to insert. �Press the RED BUTTON on the remote control. That channel will now be displayed on the screen. �Move the red flashing display on to the required programme number position.
�If you do not want the stations to be stored automatically, cancel APS pressing �TV� button. �If you want to continue, then first by pressing the � � or � � buttons, come to the �Tuning Mode � item and select the mode at which your TV will run the APS. If you select ChannelTuning Mode, APS will run according to Channel Tuning Mode and will autosearch according to the Channel numbers of the stations in your area. If you select Frequency T uning Mode, APS will run according to Frequency Tuning Mode and will auto-search according to the frequencies of the stations in your area. Selected tuning mode will appear in the highlightened bar at the bottom of the WARNING menu. �Then, after selecting the Tuning Mode if you want to start APS, by pressing the � � or � � buttons, come to the � Start� item and by pressing � � or � � button start the APS. �When you start APS the below menu will appear on the screen.
