Door reversibility
1. Unplug the appliance from the power supply before carrying out the below-mentioned operations. 2. Remove the ventilation grill (D). 3. Remove the bottom hinge (E). 4. Remove the door by releasing it from the top hinge pin (D). 5. Remove the pin (A) and the washer (B) from the top hinge (C), then mount these on the opposite side, after having removed the plugs which must be refitted on the other side. 6. Refit the door. 7. Screw down the bottom hinge (E) on the opposite side. 8. Remove the plug (F) from the ventilation grill (D) and replace it on the opposite side. 9. Re-assemble the ventilation grill (D). 10.Unscrew the handle. Refit it on the opposite side after having pierced the plugs with a punch. Cover the holes left open with the plugs contained in the documentation pack Warning: After having reversed the opening direction of the doors check that all the screws are properly tightened and that the magnetic seal adheres to the cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket or accelerate this process by heating up the part involved with a normal hairdrier.
PR220
PR19