Timer-recording radio programs
You can record a preset radio station from a specified time. To timer-record, you must preset the radio station (see �Presetting radio stations� on page 10) and set the clock (see �Setting the time� on page 7) beforehand.
7 Insert a recordable tape with the side
you want to record on facing towards you.
8 Press z. 9 Press nN, if you want to switch the
direction.
10Press RDS/DIR (PLAY MODE/RDS/DIR
on the remote) repeatedly to select g to record on one side, h to record on both sides.
1 Tune in the preset radio station that 2 Press CLOCK/TIMER on the remote
you want to record from (see �Listening to the radio� on page 11). repeatedly until �SET TMR� appears, then press TUNER MEM/ENTER on the remote.
11Press ?/1 to turn off the system.
Tape
To Do this
Check or change the setting
Turn on the system and then start over from step 1 when the TIMER indicator appears. Press TIMER ON/OFF on the remote until the TIMER indicator goes on. Press TIMER ON/OFF on the remote until the TIMER indicator goes off.
�ON� appears, and the hour indication flashes.
Activate the timer operation Cancel the timer operation
3 Set the starting time.
Press TUNING/CLOCK/TIMER + or � on the remote repeatedly to set the hour, then press TUNER MEM/ENTER on the remote.
The minute indication begins flashing next.
Press TUNING/CLOCK/TIMER + or � on the remote repeatedly to set the minute, then press TUNER MEM/ENTER on the remote.
Notes
The hour indication flashes again.
� If the system is in the recording or recording-pause mode at the preset time, the timer recording will not be made. � If the system is playing back a tape at the preset time, the system will switch to the tuner, but the timer recording will not be made.
4 Set the time to stop the recording
following the procedure in step 3.
5 Press TUNING/CLOCK/TIMER + or � on
the remote repeatedly until �RECORD� appears, then press TUNER MEM/ ENTER on the remote.
The TIMER indicator lights up.
6 Press TUNING/CLOCK/TIMER + or � on
the remote repeatedly to adjust the volume* for listening to the radio when it is activated by the timer, then press TUNER MEM/ENTER on the remote.
* This does not affect the recording volume; it only adjusts the volume for when the radio turns on at the preset time.
