PIONEER CNDV-50MTP
Instrukcja Obsługi

2

Touch or to adjust front/rear speaker balance. Each time you touch or moves the front/ rear speaker balance towards the front or the rear. FRONT:15 � REAR:15 is displayed as the front/rear speaker balance moves from front to rear. FR:00 is the proper setting when only two speakers are used. When the rear output setting is REAR SP SUB. W, you cannot adjust front/rear speaker balance. � Setting the rear output and subwoofer controller � Page 94

3

Touch �+� or ��� to adjust the level of the equalizer band. Each time you touch �+� or ��� increases or decreases the level of the equalization band. +6 � �6 is displayed as the level is increased or decreased. Touch or to select the desired frequency. Touch or until the desired frequency appears in the display. Low: 40 � 80 � 100 � 160 (Hz) Mid: 200 � 500 � 1k � 2k (Hz) High: 3.15k � 8k � 10k � 12.5k (Hz)

4

5
or moves the left/

3

Touch

or

to adjust left/right speaker

balance. Each time you touch right.

right speaker balance towards the left or the LEFT:9 � RIGHT:9 is displayed as the left/ right speaker balance moves from left to right.

Touch or to select the desired Q factor. Touch or until the desired Q factor appears in the display. 2WIDE � 1WIDE � 1NARROW � 2NARROW � If you make adjustments, CUSTOM curve is updated.

Adjusting equalizer curves
You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer curve settings are memorized in CUSTOM. � You can adjust the center frequency, level and the Q factor (curve characteristics) of each currently selected curve band (LOW/MID/ HIGH). � BAND: You can select the equalizer band. � LEVEL: You can select the decibel (dB) level of the selected EQ. � FREQUENCY: You can select which frequency to be set as the center frequency. � Q FACTOR: You can select the details of the curve characteristics.
Customizing the Source Setting Chapter 8 Audio Adjustments AV

Adjusting bass and treble
Use this function to adjust the bass and treble. The ability to select the frequency as well as the level gives you good control over the tonal balance of the audio. The bass and treble adjust screens allow you to reduce or boost frequencies in the following area; Bass - 40, 63, 100, 160 (Hz) Treble - 2.5K, 4K, 6.3K, 10K (Hz) � If EQ-EX is turned on and CUSTOM is selected as the equalizer curve, you can adjust bass and treble settings. � Compensating for equalizer curves (EQ-EX) � Page 92

1 2 3

Touch �BASS� or �TREBLE� in the AUDIO menu. Touch or quency. to select the desired fre-

1 2

Touch �EQ MENU� in the AUDIO menu. Touch or to select the equalizer band to adjust. Each time you touch or selects equalizer bands in the following order: LOW � MID � HIGH

Touch �+� or ��� to adjust the bass or treble level. Each time you touch �+� or ��� increases or decreases the bass or treble level. +6 � �6 is displayed as the level is increased or decreased.

90