SONY CPDG400
Instrukcja Serwisowa

x Using the control button
1 Display the main MENU.
Press the center of the control button to display the main MENU on your screen.
MENU

Adjusting the brightness and contrast
Brightness and contrast adjustments are made using a separate BRIGHTNESS/CONTRAST menu. These settings are stored in memory for all input signals.

Automatically sizing and centering the picture (AUTO)
You can easily adjust the picture to fill the screen by using the (AUTO) item in the SIZE/CENTER menu.

Adjusting the size of the picture (SIZE)
This setting is stored in memory for the current input signal.

1 Press the center of the control button. 1 Press the center of the control button.
The main MENU appears on the screen. The main MENU appears on the screen.

1 Move the control button in any direction.
The BRIGHTNESS/CONTRAST menu appears on the screen.
BR I GHTNESS / CONTRAS T

2 Move the control button to highlight 2 Move the control button to highlight
SIZE or CENTER and press the center of the control button again. The SIZE/CENTER menu appears on the screen.

SIZE and press the center of the control button again. The SIZE/CENTER menu appears on the screen. for

2 Select the menu you want to adjust.
Highlight the desired menu by moving the control button towards the rear to go up (M), towards the front to go down (m), and left (<) or right (,) to move sideways.

31

85

3 First move the control button m/M to select
horizontal adjustment, or for vertical

3 First move the control button m/M to select 2 Move the control button m/M to adjust the
brightness ( ), and </, to adjust the contrast (6). The menu automatically disappears after about 3 seconds. If you set sRGB to �ON� on the color setting, the brightness ( ) and contrast (6) are automatically changed to �31� and �85�
respectively.

(AUTO). Then move the control button ,. The picture automatically fills the screen.

adjustment. Then move the control button </, to adjust the size.

FRONT
MENU MENU

Enlarging or reducing the picture (ZOOM)
This setting is stored in memory for the current input signal.
Notes � This function is intended for use with a computer running Windows or similar graphic user interface software that provides a full-screen picture. It may not work properly if the background color is dark or if the input picture does not fill the screen to the edges (such as an MSDOS prompt). � The displayed image moves for a few seconds while this function is performed. This is not a malfunction.

REAR 3 Adjust the menu.
Move the control button left (<) or right (,) to make the adjustment.
MENU

For more information about sRGB, �Adjusting the color of the picture (COLOR) on page 12.

1 Press the center of the control button.
The main MENU appears on the screen.

2 Move the control button to highlight

SIZE or CENTER and press the center of the control button again. The SIZE/CENTER menu appears on the screen.

US

3 Move the control button m/M to select

Adjusting the centering of the picture (CENTER)
This setting is stored in memory for the current input signal.

(zoom), and move </, to enlarge or reduce the picture.

Notes � Adjustment stops when either the horizontal or vertical size reaches its maximum or minimum value. � The horizontal adjustment value is not displayed in the menu.

1-4
4 Close the menu.
Press the center of the control button once to return to the main MENU, and twice to return to normal viewing. If no buttons are pressed, the menu closes automatically after about 30 seconds.
MENU

1 Press the center of the control button.
The main MENU appears on the screen.

2 Move the control button to highlight

CENTER and press the center of the control button again. The SIZE/CENTER menu appears on the screen. for horizontal adjustment, or for vertical adjustment. Then move the control button </, to adjust the centering.

3 First move the control button m/M to select

x Resetting the adjustments
Press the RESET button. See page 15 for more information on resetting the adjustments.

RESET

10

11