PANASONIC CQC9800U
Instrukcja Obsługi

E N G L I S H 9

Before Disc Playback
Available Discs
� CD-DA
1 Press [<: eject] (OPEN). If there is a disc loaded, the disc will be ejected.

CD Player
Disc Insert
[<: eject] (OPEN) Do not watch the scroll display while driving. [:]/[9] (6/5) (Track selection/fast forward/fast reverse)

E N G L I S H 10

� MP3/WMA

2 Insert a disc.

Label side

[BAND] (;/1: Pause) (SET) [SOURCE] Disc indicator lights when the disc is loaded. [DISP] (Display)

Track Selection
Caution: � 3q (8 cm) CD is not available for this unit, so do not insert it. � Do not use irregularly shaped discs. � Do not use discs that have a seal or label attached. � To avoid damaging the front panel, do not push it down or place objects on it while it is open. � Keep your �ngers and hands away from the front panel when the panel is in motion. � Do not insert foreign objects into the disc slot. Note: � The power will be turned on automatically when a disc is loaded. � A disc which has both CD-DA data and MP3/WMA data on it may not be reproduced normally. (For example, it may be reproduced without sound.) � Refer to the section on �Notes on MP3/WMA� (page 36) and �Notes on Discs� (page 62). [9]: Next track [:]: Beginning of the current track When placing a disc into or taking a disc out from the main unit, hold it as shown in the �gure, and refrain from putting any of your �ngers into the disc�s center hole. Note: � It may take some time to start playing. � Playback will start automatically after recognizing the data of the loading disc. For the previous track, press twice.

Text Display
Press and hold [DISP] (display) for more than 2 seconds in the mode display. *Disc/track title (default)

Fast Forward/Fast Reverse
Press and hold [9] (5): Fast forward [:] (6): Fast reverse Release to resume the playback. Mode display

Pause
Press [;/1]. Press [;/1] again to cancel. (Example: CD-DA)

* Press and hold [BAND] for more than 2 seconds to have an another circle scroll when a title is displayed. Note: � �NO TEXT�: Displays when there is no text.

Scan Play
The �rst 10 seconds of each track is played in sequence. Press [5] (SCAN). lights. Press [5] (SCAN) again to cancel.

When CD is in the Player
Press [SOURCE] to select the CD (MP3/WMA) player mode and playback starts.

Disc Eject
This instructions on this page are followed for both CD-DA playback and MP3/WMA playback. 1 Press [<: eject]. The disc will be ejected after the front panel fully opens. 2 Take a disc. 3 Press [<: eject] again to close. Note: � If no operation takes place within 20 seconds or so after the panel has opened, the panel will close automatically.

Direct Track Selection
Example: track number 10 1 Press [�]. 2 Press [1] [0]. 3 Press [BAND] (SET). Note: � To suspend direct selection, press [DISP] (display) or [�]. � Random, scan and repeat play are canceled once [�] is pressed.

[SOURCE]
POWER MENU NUMBER

[0] to [9] (Track number) [5] (Scan play) [6] [5] (Track selection/fast forward/fast reverse) [BAND] (Pause) (SET)

SOURCE MUTE

SEL

#
2

VOL

1
RAND

3
REP

SCAN

[�] (Number)

4
6

5 8 0

6
5

7

9

BAND SET

DISP

[DISP] (Display)

Car Audio

28

CQ-C9800/9700U

CQ-C9800/9700U

29