JVC CQX3U
Instrukcja Serwisowa

1.3.3 Disassembly method ( II ) <OP Unit>
STEP PART NAME POINT NOTE

1 OP Block ASSEMBLY 2 COVER CCD BASE ASSEMBLY SPACER SET PLATE 3 TILT FRAME RATCH GEAR MAIN PIN 4 RATCH MAGNET NUT ASSEMBLY RATCH PIECE

Remove screws 3 (208) Remove screws 3 (206),2 (207), 1 (236) Remove screws 3(206),2(207). Remove the CCD Board Assy 20(SD1) Remove the SET RING 2 (231) Remove Screws 3 (237),1 (236) Note 1 Note 2 Note 3 Note 4

Note 2 Make sure that the torsion spring is in the groove of the latch gear. Note 3 Turn the latch gear clockwise ( ) and position it so that the toothless portion comes to the level that is as high as the main frame.
NOTE2

Note 1 Turn and fix the set ring and make sure that the convex marks are identical.

NOTE3

Note 4 Never move the setscrew in the center of the nut assembly!

1

208

203

SET SCREW

208

206
2

202

206
2

234 221 222

Remove screw marks STEP 1 STEP 2 STEP 4 1 2 4

237 225

4

230 224 223

231

204 205

232 226 228 227 229 231

CCD Board Assembly
S2

SD1

207 234 236
4

233 237
4

Fig. 1-3-3

1-6