Setting the Clock�Continued
Setting the Clock Manually
The time can be displayed in either 12- or 24-hour format.
STANDBY/ON Number button TIMER / CLOCK CALL DISPLAY MENU/NO/ CLEAR ENTER
7
Use the Previous and Next [ ]/ [ ] buttons to set the time. You can also use the remote controller�s number buttons to enter the time.
For the 12-hour format, use the remote controller�s [>10] button to select AM or PM.
8
Press [ENTER].
1
Press the [TIMER] button repeatedly until �Clock� appears.
The clock is set and the second dot starts �ashing.
Displaying the Day and Time
2
Press [ENTER].
To display the day and time, press the remote controller�s [CLOCK CALL] button. If the CD receiver is on Standby, the time is displayed for 8 seconds.
3
Use the Previous and Next [ [ ] buttons to select �Manual Adjust.�.
]/
Using the 12- or 24-hour Format
To change the time format between 12-hour and 24-hour, while the time is shown on the display, press the [DISPLAY] button.
Displaying the Time in Standby Mode
4
Press [ENTER].
To set the CD receiver so that the time is displayed while its on Standby, turn on the CD receiver, and then press and hold its [STANDBY/ON] button for 2 seconds. Note that having the time displayed in Standby mode will consume a little more power.
5
Use the Previous and Next [ ]/ [ ] buttons to select the day of the week. You can select: SUN, MON, TUE, WED, THU, FRI, or SAT.
6
Press [ENTER].
To cancel the Manual Adjust function at this point, press the [MENU/NO] button.
