Bardzo dobra jakość skanu, przystępna cena. Instrukcja serwisowa okazała się przydatna przy "reanimowaniu" dwudziestoparoletniego decka, który teraz pięknie gra :)
...instruction is ok.
...instrukcja jest ok.
Thanks/Dzięki
Tekstowy podgląd strony 20 (kliknij aby zobaczyć)
10. Press [CLEAR] button on the remote control unit. Fig. h appears on the screen.
"*******" differ depending on the models.
When �OK� appears on the screen, the factory default will be set. Then the firmware renewal mode is complete. 11. To exit this mode, press [POWER] button.
MODEL : ******* Version : *.** Region : * EEPROM CLEAR : OK
EEPROM CLEAR : CLEAR
EXIT: POWER
Fig. h
<HDD Section>
1. Items necessary to use G6 Serial Firm Up Software:
G6_SerialFwUp_Ver002.EXE Save the above file into the local folder.
3. To start up the G6 Serial Firm Up Software:
Com 1 has been selected as the default for the G6 Serial Firm Up Software.
Flash Write tab
2. To change to the maintenance mode of the DVR with DVD Player:
1. Connect the DVR with DVD Player and a PC in serial. 2. Change the DVR with DVD Player to maintenance mode. 3. Using the [CHANNEL] up/down buttons on the remote control, select �4:SERIAL UPDATE� and press [ENTER] on the remote control. 4. When �Please Press Enter Key� is displayed, press [ENTER] on the remote control. 5. When the progress bar is displayed, the change is complete on the DVR with DVD Player.
