PANASONIC CT36SX32UF
Instrukcja Obsługi

OPTIONAL EQUIPMENT CONNECTIONS

Optional Equipment Connections
VCR Connection
VCRs, video disc players, video game equipment, and DSS equipment can also be connected to the video inputs. See the optional equipment manual for more information.
Note: Input 1 is a dual-purpose input. It is primarily intended for connection with 480i devices such as a DVD player using the Y PB PR component video jacks and Audio L & R jacks. However, it can also be connected to conventional composite video sources such as a VCR, using only the Y/Video jack and Audio L & R jacks. The on-screen label will display Component or Video 1 depending on which source is connected.
VCR
TERMINALS ON BACK OF THE TV
VIDEO OUT

Use
INPUT 1 INPUT 2 S-VIDEO PROG OUT ANT 1 VIDEO/Y PB L PR ANT 2 R AUDIO R L VIDEO L COMPONENT VIDEO INPUTS

either

the

L AUDIO OUT R

S-Video or Video connection.

ANT OUT

ANT IN

Incoming Cable

SPLIT OUT

TO AUDIO AMP R

CABLES NOT SUPPLIED

If INPUT 1 is used as component video input, connect the A/V Out from the VCR to INPUT 2 A/V jacks. Connect Video Out and Audio out from VCR to INPUT 2 Video jack and Audio L& R jacks. INPUT 3 can also be used to connect a VCR and other optional video equipments.
Note: The remote control must be programmed with supplied codes to operate the VCR.

Viewing a television program Procedure
1. 2. Select ANT1 in the SET UP menu under Prog Chan (Program Channels). Tune the television to the television program you want to view.

Viewing a video Procedure
r Option A 1. Select ANT1 in the SET UP menu under Prog Chan. 2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR. 3. Begin the video. Option B 1. Select ANT2 in the SET UP menu under Prog Chan. 2. Tune the television to Channel 3 or 4, depending on your VCR. 3. Begin the video.

r

Recording a television program Procedure
r Option A (Recording and viewing the same program) 1. Select ANT2 in the SET UP menu under Prog Chan. 2. Tune the television to Channel 3 or 4, depending on your VCR. 3. Using the VCR, tune to the television program you want to record. 4. Begin recording. Option B (Recording one program while viewing another program) 1. Select ANT1 in the SET UP menu under Prog Chan. 2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1, VIDEO 2, etc.) connected to your VCR. 3. Using the VCR, tune to the television program you want to record. 4. Begin recording. 5. Press the TV/VIDEO button on the remote control to switch back to TV mode. 6. Tune the television to the television program you want to view.

r

6l