Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 12 (kliknij aby zobaczyć)
TAPE PLAYBACK
Switching modes When the unit is in Radio or CD Changer Play mode, inserting a cassette switches the unit to Tape Play mode automatically.
SOUNDADJUSTMENTS
22
To preventtape problems
Before inserting a cassette into the unit, make sure that there is no slack in the tape. If necessary, take up the slack by inserting a pencil into the spindle hole and winding. Tapes of 90 minutes or longer are extremely thin and easily deformed or damaged. They are not recommended.
MUTE
1 Press SEL to select the mode that you
wish to adjust from: VOL (volume), BASS (bass), TRE (treble), BAL (balance) and FAD (fader).
The following order. indications appear in cyclic
If you do not proceed with step 2 within 5 seconds, the selected mode is canceled, and the indication returns to the current source mode.
2
Press +/�
to adjust the level.
Press and hold either button to change the level rapidly.
+
Decreases the volume level Decreases the bass level Decreases the treble level Decreases the level of the right speaker(s) Decreases the level of the front speakers Increases the volume level Increases the bass level Increases the treble level Decreases the level of the left speaker(s) Decreases the level of the rear speakers
Without selecting any mode with SEL, only the volume level can be adjusted by pressing +/�. MUTE button Press this button to temporarily Iowerthevolume. Press it again to restore the previous volume.
