First steps to use
Before using the coffee system for the first time
1. Clean the parts ^ Hand wash the coffee capsule plate with hot water and liquid dish soap. ^ The water tank can be washed in the dishwasher. 2. Fill the water tank ^ Open the appliance door. ^ Lift the water tank and pull it out. ^ Fill the container with fresh, cold tap water to the "Max." mark. Push the water tank back into the machine. 3. Fill the system with water
HOT WATER K1 2 3 4 5 Lon
G
4. Rinse the lines
RINSE K1 2 3 4 5 Lon
G
kC
^ Turn the left jog shuttle to "Rinse". ^ Press the right jog shuttle. Water runs from the coffee dispenser. ^ Press the steam lever down. Water runs from the steam valve. ^ Push the steam lever up after a few seconds.
kC
^ Set a cup under the steam valve. ^ Turn the left jog shuttle to "Hot water". ^ Press the right jog shuttle. The steam valve dispenses hot water. ^ Press the right jog shuttle again to turn the hot water off. ^ Turn the left jog shuttle to "Heating with steam". ^ Press the steam lever down. ^ Push the steam lever up when steam starts to be dispensed. The lines are filled and the coffee system is ready to use.
