...instrukcja serwisowa w pełni czytelna i kompletna. Dziękuję!
Tekstowy podgląd strony 15 (kliknij aby zobaczyć)
CVP09FR
29.Remove wiring connectors of the compressor cord by using longnose pliers.(3 parts) Then turn the band to the direction, as shown in below figure. CAUTION: RETURN THE BAND TO THE ORIGINAL DIRECTION WHEN RE-ASSEMBLYING.
CAUTION: DISCHARGE THE FAN MOTOR CAPACITOR AND RUNNING CAPACITOR BEFORE TOUCHING THESE CAPACITORS OR OTHER COMPONENTS OR WIRING. 30.Unscrew 2 screws holding the control box. Remove the control box from the unit.
33.Move the band to the direction shown in below figure (approx.11/ 16"). Then removed the drain hose B.
34.Unscrew the screw holding the lead wire. 31.Unscrew 6 screws holding the casing cover. Remove the casing cover from the unit.
35.Turn the band, as shown in below figure. CAUTION: RETURN THE BAND TO THE ORIGINAL DIRECTION WHEN RE-ASSEBLYING. 32.Unscrew 4 screws holding the orifice. Remove the orifice from the unit. Move the band to the direction of the arrow(approx.11/16"), and removed the drain hose A.
