Thermostat
After using your oven the first few times, it may seem hotter or cooler than your previous oven. Oven thermostats, over a period of years, may drift from the factory setting and timing differences of 5 to 10 minutes are not unusual between an old and a new oven. You may be inclined to think that the new oven is not performing correetly; however, your new oven has been set correctly at the factory and is more likely to be accurate than the oven it replaced, If you think the oven should be hotter or cooler, you can adjust it yourself. To decide how much to change the thermostat, set the oven temperature 25°F higher or lower than the temperature in your recipe, then bake. The results of the "test" should give you an idea of how much the thermostat should be changed,
1. Press the OVEN TEMP pad. 2. Using the SET knob, select an oven temperature between 500°F and 550°F. 3. Press and hold the OVEN TEMP pad for about four seconds. The display will change to the oven adjustment displ_ which reads 00. 4. The oven thermostat can be adjusted up to +35°F hotter or -35°F cooler. Use the SET knob to select the desired change in the display. 5. When you have made the adjustment, press the CANCEL pad to go back to the time-ofday display. Use your oven as you would normally. NOTE: This adjustment will not affect Broil or Clean temperatures. The new temperature will be remembered if the power is interrupted.
