LOUDNESS
Switching loudness on/off
If loudness is activated, the bass and treble levels are aurally compensated, i.e. they are increased at lower volume levels. � Press the AUD / LD button = for approximately two seconds. LD lights up in the display when loudness is switched on.
EQUALIZER
Equalizer
This unit is equipped with a parametric digital equalizer. In this case, parametric means that one frequency can be increased or decreased (GAIN +8 to -8) individually for each of the five filters. The following filters are available: SUB LOW EQ 32 - 50 Hz q LOW EQ 63 - 250 Hz q MID EQ 315 - 1,250 Hz q MID/HIGH EQ 1,600 - 6,300 Hz q HIGH EQ 8,000 - 12,500 Hz These filters can be set without the need for measuring equipment. They will allow you to significantly influence the sound characteristics in your vehicle.
q
Setting the loudness intensity
The loudness level can be set in steps ranging from 1 to 6.
� Press the MENU button 8.
�MENU� appears in the display.
� Keep pressing the
button : until �LOUDNESS� appears in the display. the level. or button : to set
� Press the
Notes on adjusting the settings
We recommend you use a CD that you are familiar with for making changes to the settings. Before adjusting the equalizer, set the audio and volume distribution settings to zero and deactivate loudness. For further details, refer to the chapter entitled �Audio and volume distribution settings�.
� When you have finished making
your changes, press the MENU 8 or OK ; button twice.
� Listen to the CD. � Analyze the sound impression. � Now read the �Sound impression�
section in the table entitled �Help adjusting the equalizer�.
� Set the equalizer values as described in the �Measures� section.
