HITACHI D36WF840N
Instrukcja Obsługi

10

Input the Date of the programme to be recorded using the buttons �0� to �9� (alternatively, use the right/left cursor buttons )

NOTE: when using the right/left cursor buttons to enter a date, reaching the last day of a calender month will increase (or decrease, depending on which way you are adjusting the day value) the month value by one.This is also true of the year. For example 31-01-01 + = 01-02-01

11

Input the Start time using the buttons �0� to �9�.

NOTE: The RECORD EVENT ENTRY menu can operate on either an a.m/p.m or 24 hour clock service. This will depend on the broadcaster of the service you are watching, but is normally 24hour.

12 13 Digital Features
FEATURES VCR Recording

Input the Duration time by using the buttons �0� to �9� on your handset.

Once RECORD EVENT is complete, accept selection.

14 15

The inputted programme to record can now be viewed in RECORD MENU. Repeat if necessary.

To return to normal TV operation press the TV button on your handset.

PLEASE NOTE: DO NOT FORGET TO SET THE TIMER ON YOUR VIDEO. If your video uses Video Link then the TV will automatically turn on the VCR for you. Check your VCR manual for details on this.

52

PLEASE NOTE: To record a programme from the TV without programming a record event, put the TV into �Active Standby�. You do this by pressing the Standby key, followed by the AV key within 3 seconds. The TV will then switch off and the green light on the front of the TV will come on showing that the TV is in �Active Standby�. In this mode, the digital receiver is still operating, allowing you to record the current programme via AV1. Please remember that this mode uses more power than full standby, and is not recommended for long term use.