MIELE DA217
Instrukcja Obsługi

Installation
Attaching the chimney extension
The use of a chimney extension, allows the hood to be installed at various distances from the ceiling. NOTE: The extension must be intalled in relationship to the method of venting; Extraction or Recirculation.

^ Remove the protective foil from chimney extension. ^ Bend the top hanging tabs 45° inwards. This will make installing the extension easier. Be careful of sharp edges. Recirculation Air extraction

The extension piece has vented openings on one end. These vents are required for recirculation mode and will be closest to the ceiling when installed. For air extraction, the vents are not required and are covered by the chimney.

Recirculation

Air extraction

^ Pull the chimney extension slightly outwards and snap over the upper retaining plate B. When installing for recirculation, ensure that the vents are positioned so they line up with the diverter.

37