A preset number appears in the front panel display.
ST FM MHz
You can preset 20 FM stations, and 10 AM stations. Before tuning, make sure to turn down the volume to minimum.
"/1 FUNCTION BAND MEMORY
4
Press PRESET + or � to select the preset number you want.
ST FM MHz
5
Press ENTER.
The station is stored.
PRESET �/+ ENTER TUNING �/+ x
FM
m
ST MHz
6 1
Press BAND repeatedly until the band you want appears in the front panel display.
Repeat 1 to 5 to store other stations.
To change the preset number
Restart from step 1.
Each time you press BAND, the band toggles between AM and FM.
To change the AM tuning interval
The AM tuning interval can be set to either 9 kHz (default) or 10 kHz (for some areas). To change the AM tuning interval, first tune in any AM station, then turn off the system by pressing "/1 on the remote, or "/1 on the system. While holding down x (stop) (on the system), press "/1 on the system to turn on the power. If you change the interval, AM preset stations will be erased. To reset the interval, repeat the same procedure.
2
Press and hold TUNING + or � until the auto scanning starts.
Scanning stops when the system tunes in a station. �TUNED� and �ST� (for stereo program) appear in the front panel display.
ST FM MHz
