FUNAI DBVR-2700
Instrukcja Obsługi

DVD SETUP Audio Setting
Choose the appropriate Audio settings for your equipment as it only affect during the playback of DVD discs of the DVD/VCR. 1 Press DVD, then press SETUP during playback is

Display Setting
You can change certain aspects of the DVD/VCR�s display screens, on-screen messages and the display panel on the front of the DVD/VCR. 1 Press DVD, then press SETUP during playback is

stopped.
2 Press K or L to select AUDIO, then press ENTER. 3 Press K or L to choose the below items and press

stopped.
2 Press K or L to select DISPLAY, then press

ENTER.
3 Press K or L to select the below items, then press

ENTER repeatedly to turn the setting ON or OFF. Dynamic Range Control (DRC):
� To compress the range of sound volume.

ENTER. TV Aspect: � Press K or L for an item selection, then press
ENTER. � Select 4:3 LETTER BOX for a black bars appears on the top and bottom of the screen. � Select 4:3 PAN & SCAN for a full height picture with both sides trimmed. � Select 16:9 WIDE if a wide-screen TV is connected to the DVD/VCR.

Dolby Digital:
� If you connected the DVD/VCR to a stereo with Dolby Digital compatible.

DTS:
� If you connected the DVD/VCR to a stereo with DTS compatible.

MPEG:

� If you connected the DVD/VCR to an MPEG-compatible stereo.

Panel Display: � Press K or L to select BRIGHT, DIMMER and AUTO,
then press ENTER. � This adjust the brightness of the display panel with the factory default BRIGHT. � When AUTO is selected, the display dims only during playback.

DOWN SAMPLING:
� Press ENTER, then K or L to select AUTO, 48kHz or 96kHz. Press ENTER again to confirm selection. � Select 96kHz if the disc was recorded in PCM 96kHz, otherwise select 48kHz.

4 Press SETUP to exit.

Angle Icon:
� Press ENTER repeatedly to turn Angle icon ON or OFF. � The default setting is ON.

TruSurround Setting
You can enjoy improved stereo sound when you play disc in Dolby Digital, PCM 48kHz or MPEG Audio. 1 Press MODE during playback. 2 Press ENTER repeatedly to select ON or OFF. � The factory default setting is OFF. Select ON only is you connected the DVD/VCR to a stereo with Dolby Digital or MPEG decoder.

Auto Power Off:
� Press ENTER repeatedly to turn Auto Power ON or OFF. � The default setting is ON and it will turn the DVD/VCR to off automatically after 35 minutes of no use.

Background:
� Press ENTER repeatedly to select BLUE or GREY as the background colour for the on-screen menus. 4 Press SETUP to exit.

NOTE:
� If connection using COAXIAL out, turn off SRS TruSurround, otherwise there will be no sound.

� 26 �

EN