FUNAI DBVR-5500
Skrócona Instrukcja Obsługi

Channel Presetting

7) Press or then press

.

to select �CHANNEL�,
CH Indication 01 � 10 21 � 69 74 � 78 80 � 99, 100 121 � 141

Channel Plan
TV Channel IRA � IRJ, GAP E21 � E69 X, Y, Z, Z+1, Z+2 S1 � S20, GAP S21 � S41

Press or . The DVD/VCR tuner will begin to search up or down automatically. When a channel is found, the DVD/VCR will

Channel Presetting
Tuning of broadcast channels not already preset in the DVD/VCR can be performed in two ways.

stop searching and the picture will appear on the TV Screen. You can select desired channel number by

Automatic Channel Preset
1) Turn on the TV and select the channel set as the video channel on the TV. 2) Press 3) Press then press 4) Press or then press 5) Press or then press , then or . to select �CH TUNING� . to select �AUTO� , . . to select �INITIAL� ,

MENU TIMER SET UP INITIAL

using the number buttons. You must refer to the following Channel Plan table and press three digits to select the channel number. (To select channel 24, press �0� button first and then press �2� and �4�. ) 8) Press to exit.

INITIAL

,

CH TUNING CLOCK RF OUT

Select a Channel
You can select a channel using CH. (
CH TUNING AUTO MANUAL MOVE

/

)

or directly pressing the number buttons on the remote control.

Scanning

Loading and Playing a DVD
Manual Channel Preset
Manual channel preset enables you to manually tune in a channel. 1) Press , then . 2) Press or to select �INITIAL� , then press . 3) Press or to select �CH TUNING�, then press . 4) Press or to select �MANUAL� , then press . , 5) Press or to select �POSITION� then press . When a weak signal is received in Manual Tuning mode, you can change the background to solid blue or the static screen by pressing . , or 6) Press the number buttons,
MENU TIMER SET UP INITIAL

1) Turn on the TV, amplifier and any other components connected to the DVD/VCR. 2) Set the TV and audio receiver (commercially available) to the correct channel. 3) Press and confirm that the DVD OUTPUT indicator is lit. If not, press to switch to DVD mode. 4) Press to open the disc loading tray and place the disc on the tray, with the label side up. 5) Press . The tray will close automatically and playback will start. � For DVDs with a title menu recorded, the screen will display the title. 6) Press to stop playback.

INITIAL CH TUNING CLOCK RF OUT

CH TUNING AUTO MANUAL MOVE

MANUAL POSITION CHANNEL DECODER SKIP P08 008 [OFF] [OFF]

Note: � A �prohibited icon� may appear at the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by this unit or the disc.

to select a position number from 01-99, then press .

Funai Help Phone Number in UK

0870-240-5807