SONY DCRHC33E
Instrukcja Obsługi

Searching for the starting point
Make sure that the CAMERA-TAPE lamp lights up.

Searching manually (EDIT SEARCH)
You can search for the start point to start the next recording while viewing the pictures on the screen. The sound is not played back during the search.

Searching for the last scene of the most recent recording (END SEARCH)
[END SEARCH] will not work once you eject the cassette after you have recorded on the tape. Touch
60min END SEARCH EXECUTING

1 Touch
60min

.
STBY 0:00:00

�
1

.
0:00:00

CANCEL

Touch here to cancel the operation.

EDIT

The last scene of the most recent recording is played back for about 5 seconds, and the camcorder enters the standby mode at the point where the last recording has �nished.
� [END SEARCH] will not work correctly when there is a blank section between recorded sections on the tape. � You can also select [END SEARCH] from the menu. When the PLAY/EDIT lamp lights up, select the [END SEARCH] shortcut in Personal Menu (p. 34).

2 Touch and hold

(to go backward)/ (to go forward) and release it at the point where you want the recording to start.

Reviewing the most recently recorded scenes (Rec review)
You can view about 2 seconds of the scene recorded just before you stopped the tape. Touch
�
60min

Recording/Playback

.
STBY 0:00:00

EDIT

The last 2 seconds (approx.) of the most recently recorded scene are played back. Then, your camcorder is set to the standby.

29