|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
...instruction is ok.
...instrukcja jest ok.
Thanks/Dzięki
;
Documentation made available quickly and It is good quality. Thanks.
Recording a picture on the tape 1Remove the lens cap.
(p. 26)
2 Set the POWER switch
to CAMERA while pressing the small green button.
3Press OPEN
to open the LCD panel. The picture appears on the screen.
POWER
VCR OFF(CHG) CAMERA
MEMORY/ NETWORK
4Press START/STOP. Your
Viewfinder When the LCD panel is closed, use the viewfinder with your eye against the eyecup. Adjust the viewfinder lens to your eyesight (p. 31). When you purchase your camcorder, the clock setting is set to off. If you want to record the date and time for a picture, set the clock setting before recording (p. 21). camcorder starts recording. To stop recording, press START/ STOP again.
Monitoring the playback picture on the LCD screen (p. 38) 2 Press 1Set the POWER
switch to VCR while pressing the small green button.
OWER P
VCR OFF(CHG)
MEMORY/ NETWORK
of the touch panel to rewind the tape.
CAMERA
3 Press
of the touch panel to
Quick Quick Start Start Guide Guide
start playback. Note When using the touch panel, press operation buttons lightly with your finger or the supplied stylus (DCRTRV39 only) supporting the LCD panel from the back side of it. Do not press the LCD screen with sharp objects other than the supplied stylus (DCR-TRV39 only).
Do not pick up your camcorder by holding parts as illustrated. Viewfinder LCD panel Battery pack
9
|
