|
|
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Dobrej jakości skan - wkońcu mogłem poznać wszystkie funkcje tego odtwarzacza - polecam .
;
Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Section
HHHHHHHHHHHHHH Tuner
04
Listening to the radio
1
Important
23
4
# You can cancel seek tuning by pressing either c or d with a quick press. # If you press and hold c or d you can skip broadcasting stations. Seek tuning starts as soon as you release the buttons. Note When the frequency selected is being broadcast in stereo the stereo (5) indicator will light.
5 To perform seek tuning, press and hold c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found.
If you are using this unit in North, Central or South America, reset the AM tuning step (see Setting the AM tuning step on page 14).
1 Band indicator Shows which band the radio is tuned to, AM or FM. 2 Frequency indicator Shows to which frequency the tuner is tuned. 3 Stereo (5) indicator broadcast in stereo. Shows that the frequency selected is being
Storing and recalling broadcast frequencies
If you press any of the preset tuning buttons 16 you can easily store up to six broadcast frequencies for later recall with the touch of a button. % When you find a frequency that you want to store in memory press a preset tuning button 16 and hold until the preset number stops flashing. The number you have pressed will flash in the preset number indicator and then remain lit. The selected radio station frequency has been stored in memory. The next time you press the same preset tuning button 16 the radio station frequency is recalled from memory.
Notes ! Up to 18 FM stations, 6 for each of the three FM bands, and 6 AM stations can be stored in memory.
4 Preset number indicator 1 2
Shows what preset has been selected. Press SOURCE to select the tuner. Use VOLUME to adjust the sound level.
When you press VOLUME up/+, the volume is raised and when pressed down/, the volume is lowered. 3 Press BAND to select a band.
Press BAND until the desired band is displayed, F1, F2, F3 for FM or AM. 4 To perform manual tuning, press c or d with quick presses. The frequencies move up or down step by step.
6
En
|
|
|
> |
|
