PIONEER DEH-2750MP/XN/GS
Instrukcja Obsługi

Section

Tuner

04

Listening to the radio

1
Important

23

4

5

# You can cancel seek tuning by briefly pressing either c or d. # If you press and hold c or d you can skip stations. Seek tuning starts as soon as you release the button.

5 To perform seek tuning, press and hold c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found.

If you are using this unit in North, Central or South America, reset the AM tuning step (see Setting the AM tuning step on page 19).

1 Band indicator Shows which band the radio is tuned to, AM or FM. 2 LOC indicator Shows when local seek tuning is on. 3 Stereo (5) indicator Shows that the frequency selected is being broadcast in stereo. 4 Frequency indicator Shows to which frequency the tuner is tuned. 5 Preset number indicator Shows which preset has been selected. 1 2 Press SOURCE to select the tuner. Use VOLUME to adjust the sound level.

Storing and recalling broadcast frequencies

If you press any of the preset tuning buttons 16 you can easily store up to six broadcast frequencies for later recall with the touch of a button. % When you find a frequency that you want to store in memory press one of preset tuning buttons 16 and hold until the preset number stops flashing. The number you have pressed will flash in the preset number indicator and then remain lit. stored in memory. The selected radio station frequency has been The next time you press the same preset tuning button the radio station frequency is recalled from memory.
Notes ! Up to 18 FM stations, six for each of the three FM bands, and six AM stations can be stored in memory. ! You can also use a and b to recall radio station frequencies assigned to preset tuning buttons 16.

English

3 Press BAND to select a band. Press BAND until the desired band is displayed, F1, F2, F3 for FM or AM. 4 To perform manual tuning, briefly press c or d.

En

7