Operating this unit Basic Operations
Turning the unit on and selecting a source
You can select a source you want to listen to. To switch to the built-in CD player, load a disc in the unit (refer to the next page). % Press SOURCE to select a source. Press SOURCE repeatedly to switch between the following sources: Tuner�Built-in CD player�AUX
Notes ! In the following cases, the sound source will not change: � When there is no disc in the unit. � When the AUX (auxiliary input) is set to off (refer to page 12). ! AUX is set to on by default. Turn off the AUX when not in use (refer to Switching the auxiliary setting on page 12). ! When this unit�s blue/white lead is connected to the vehicle�s auto-antenna relay control terminal, the vehicle�s antenna extends when this unit�s source is turned on. To retract the antenna, turn the source off.
02
1 Press SOURCE to select the tuner.
2 Press BAND to select a band. Press BAND until the desired band (F1, F2, F3 for FM or AM) is displayed. 3 To perform manual tuning, briefly press c or d. 4 To perform seek tuning, press and hold c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found.
# You can cancel seek tuning by briefly pressing c or d. # If you press and hold c or d you can skip stations. Seek tuning starts as soon as you release the button.
Storing and recalling broadcast frequencies
% When you find a frequency that you want to store in memory, press one of preset tuning buttons 1 to 6 and hold until the preset number stops flashing. Memorized radio station frequency can be recalled by pressing the preset tuning button.
# Up to 18 FM stations, six for each of the three FM bands, and six AM stations can be stored in memory. # You can also use a and b to recall radio station frequencies assigned to preset tuning buttons 1 to 6.
Adjusting the volume
% Use VOLUME to adjust the sound level.
Operating this unit
Turning the unit off
% Press SOURCE and hold until the unit turns off.
Tuning in strong signals
Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception. 1 Press FUNCTION to select LOCAL.
Tuner
Listening to the radio
Important If you are using this unit in North, Central or South America, reset the AM tuning step (see Setting the AM tuning step on page 12).
2 Press a or b to turn local seek tuning on or off.
