Before You Start
! Keep the front panel out of direct sunlight and high temperatures.
01 Use and care of the remote control
Installing the battery
Slide the tray on the back of the remote control out and insert the battery with the plus (+) and minus (�) poles aligned properly. ! When using for the first time, pull out the film protruding from the tray.
Removing the front panel
1 Press DETACH to release the front panel. 2 Grab the front panel and remove.
3 Put the front panel into the provided protective case for safe keeping.
Attaching the front panel
1 Slide the front panel to the left until it clicks. Front panel and the head unit are jointed on the left side. Make sure that the front panel has been jointed to the head unit.
WARNING
Keep the battery out of the reach of children. Should the battery be swallowed, consult a doctor immediately.
2 Press the right side of the front panel until it is firmly seated.
# If you can�t attach the front panel to the head unit successfully, try again. Front panel may be damaged if you attach the front panel forcedly.
! Use one CR2025 (3 V) lithium battery. ! Remove the battery if the remote control is not used for a month or longer. ! There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type. ! Do not handle the battery with metallic tools. ! Do not store the battery with metallic objects. ! If the battery leaks, wipe the remote control completely clean and install a new battery. ! When disposing of used batteries, comply with governmental regulations or environmental public institutions� rules that apply in your country/area.
