PIONEER DEH-3110/XM/EE
Instrukcja Obsługi

INSTALLATION MANUAL

Installation
Note:
� Before finally installing the unit, connect the wiring temporarily, making sure it is all connected up properly, and the unit and the system work properly. � Use only the parts included with the unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. � Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle. � Install the unit where it does not get in the driver�s way and cannot injure the passenger if there is a sudden stop, like an emergency stop. � The semiconductor laser will be damaged if it overheats, so don�t install the unit anywhere hot � for instance, near a heater outlet. � If installation angle exceeds 60° from horizontal, the unit might not give its optimum performance. (Fig. 1)

<ENGLISH>
Installation with the rubber bush
Holder After inserting the holder into the dashboard, then select the appropriate tabs according to the thickness of the dashboard material and bend them.
182

60°

Dashboard

(Install as firmly as possible using the top and bottom tabs. To secure, bend the tabs 90 degrees.)

DEH-3110

53

Rubber bush Screw

Fig. 1

Fig. 2

Removing the Unit

Insert the supplied extraction keys into the unit, as shown in the figure, until they click into place. Keeping the keys pressed against the sides of the unit, pull the unit out.

У�С��УС�
This product conforms to new cord colors. о од о дл о .

Fig. 3

Printed in Thailand о л

д

<CRD3093-A/N> EE

<99H00F0V01>