7. GENERAL INFORMATION
7.1 DIAGNOSIS
7.1.1 DISASSEMBLY
A
- Removing the Case (not shown) 1. Remove the Case.
CD Mechanism Module
- Removing the CD Mechanism Module (Fig.1) Remove the four screws. Disconnect the connector and then remove the CD Mechanism Module. - Removing the Grille Panel Assy (Fig.1) Remove the two screws and then remove the Grille Panel Assy.
B
Grille Panel Assy
Fig.1
- Removing the Tuner Amp Unit (Fig.2) Remove the two screws. Straight the tabs at three locations indicated. Remove the screw.
C
Remove the three screws and then remove the Tuner Amp Unit.
*) Tuner Amp Unit is different partially from this photo.
