Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 25 (kliknij aby zobaczyć)
Section
Audio Adjustments
# You can also perform the same operations by pushing MULTI-CONTROL up or down. Note You can also switch to this setting mode in the menu that appears by using MULTI-CONTROL. Note You can also switch to this setting mode in the menu that appears by using MULTI-CONTROL.
03
Adjusting source levels
SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. ! Settings are based on the FM volume level, which remains unchanged. 1 Compare the FM volume level with the level of the source you wish to adjust. 2 Use MULTI-CONTROL to select SRC LV ADJUST. 3 Press MULTI-CONTROL to display the setting mode. 4 Turn MULTI-CONTROL to adjust the source volume. SLA +4 to SLA �4 is displayed as the source volume is increased or decreased.
# You can also perform the same operations by pushing MULTI-CONTROL up or down. Notes ! The AM volume level can also be adjusted with source level adjustments. ! The built-in CD player and the multi-CD player are set to the same source level adjustment volume automatically. ! External unit 1 and external unit 2 are set to the same source level adjustment volume automatically.
Using the high pass filter
When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are output from the front or rear speakers. 1 Use MULTI-CONTROL to select HPF.
2 Press MULTI-CONTROL to display the setting mode. 3 Use MULTI-CONTROL to select the desired setting. Turn to change the setting. OFF�50HZ�63HZ�80HZ�100HZ�125HZ
# You can also perform the same operations by pushing MULTI-CONTROL up or down.
Boosting the bass
Bass boost function boosts the bass level of sound. 1 Press and hold BASS to display BASS BOOST setting mode. 2 Turn MULTI-CONTROL to adjust the level. 0 to +6 is displayed as the level is increased or decreased.
# You can also perform the same operations by pushing MULTI-CONTROL up or down.
