|
|
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
Section
Audio Adjustments
08
Fine-adjusting equalizer curve
You can adjust the center frequency and the Q factor (curve characteristics) of each currently selected curve band (EQ LOW/EQ MID/ EQ HIGH).
Level (dB) Q=2N Center frequency Q=2W
Note If you make adjustments, Custom curve is updated.
Adjusting bass and treble
Use this function to adjust the bass and treble. The ability to select the frequency as well as the level gives you good control over the total balance of audio. ! If EQ-EX function has been selected and EQ-EX turned on and Custom selected as the equalizer curve, you can adjust bass and treble settings.
Frequency (Hz)
1 Press AUDIO and hold until frequency and the Q factor (e.g., F 80 Q 1W) appears in the display. 2 Press AUDIO to select the band for adjustment from among low, mid and high. Press AUDIO repeatedly to switch between the following functions: LowMidHighBass (bass adjustment) Treble (treble adjustment)
Adjusting bass and treble level
You can adjust the bass and treble level. 1 Press AUDIO to select Bass. Press AUDIO until Bass appears in the display.
# If the treble level has been previously adjusted, Treble will be displayed.
# If EQ-EX function has been selected and only when EQ-EX is turned on and Custom is selected as the equalizer curve, you can switch to Bass and Treble.
3 Press c or d to select the desired frequency. Press c or d until the desired frequency appears in the display. Low: 4080100160 (Hz) Mid: 2005001k2k (Hz) High: 3.15k8k10k12.5k (Hz) 4 Press a or b to select the desired Q factor. Press a or b until the desired Q factor appears in the display. 2N1N1W2W
2 Press c or d to select bass or treble. Press c and Bass is displayed. Press d and Treble is displayed. 3 Press a or b to adjust the level. Each press of a or b increases or decreases the selected bass or treble level. +6 6 is displayed as the level is increased or decreased.
English
33
En
|
|
|
> |
|
