Setting the FM tuning step
The FM tuning step during seek tuning can be switched between 100 kHz (the factory preset step) and 50 kHz. 1. With the source turned off, press and hold 1. 2. Press NEXT and then press FMstep to select the FM tuning step mode. 3. Press the corresponding button to select the desired tuning step. Button 50K 100K Tuning step 50 kHz 100 kHz
Setting the AM tuning step
The AM tuning step can be switched between 9 kHz and 10 kHz per step. Reset the AM tuning step from 9 kHz (the factory preset step) to 10 kHz when using the tuner in North, Central or South America. 1. With the source turned off, press and hold 1. 2. Press NEXT and then press AMstep to select the AM tuning step mode. 3. Press the corresponding button to select the desired tuning step. Button 9K 10K Tuning step 9 kHz 10 kHz
ENGLISH ESPA�OL DEUTSCH FRAN�AIS ITALIANO NEDERLANDS
Note: � If seek tuning is performed at 50 kHz steps, stations may be tuned in imprecisely. Tune in the stations with manual tuning or use seek tuning again.
Note: � If you switch the tuning step, the frequency range is changed simultaneously.
