PIONEER DJM-700-S/WAXJ5
Instrukcja Obsługi

EFFECT FUNCTIONS

MANUAL FILTER OPERATION
1 MANUAL FILTER The filter frequency is shifted, resulting in strong changes to the tone. Rotating the dial to the right produces high-pass filter effects, while rotating the dial to the left produces low-pass filter effects.
Low-pass filter
FREQUENCY

EFFECT FREQUENCY FILTER OPERATION
1 Effect frequency filter Sets the filter�s cutoff frequency, allowing the beat effect to be applied to a desired frequency band alone.
Through
FREQUENCY
LPF HPF

Through

High-pass filter Frequency Beat effect

Frequency Beat effect

LPF

HPF

Frequency

Frequency

2 FILTER 1 FILTER 3 FREQUENCY 2 3 FREQUENCY

The manual effecter is linked to the FREQUENCY dial. The output sounds of the manual effecter become the input sounds for the beat effect. � When the beat effect type is set to ROLL, REVERSE ROLL, UP ROLL, or DOWN ROLL, the beat effect�s output sound becomes the input sound for the manual effecter. 1 Press the FILTER button so that it flashes. � Confirm that the FILTER button flashes steadily. � When it lights, press the button so that it flashes. Each time the button is pressed, it alternates between flashing and lighting steadily. � When power is first turned ON, defaults to steadily lighted. 2 Use the effect channel select switch to choose the channel to which you wish to apply the effects. � The name of the selected channel will appear in the display�s channel name section. � When [MIC] is selected, the effect will be applied to both microphone 1 and microphone 2. 3 Use the FREQUENCY dial to adjust the filter�s cutoff frequency. � Rotate counterclockwise to apply a low-pass filter. � Rotate clockwise to apply a high-pass filter.

The effect frequency filter is linked to the FREQUENCY dial. The beat effect is applied only to the selected frequency band. � The function is not supported when SEND/RETURN is selected as the type of beat effect. 1 Press the FILTER button so that it lights. � Confirm that the FILTER button lights steadily. � When flashing, press the button so that it lights. Each time the button is pressed, it alternates between flashing and lighting steadily. � When power is first turned ON, defaults to steadily lighted. 2 Operate the beat effect. � For details, see page 18. 3 Use the FREQUENCY dial to select the frequency to which you wish to apply the beat effect. � Rotate counterclockwise to apply the effect to low-range sounds only. High-frequency sounds are set to through. � Rotate clockwise to apply the effect to high-range sounds only. Low-frequency sounds are set to through.

English
19
En