� If you press [MENU/SET] while canceling protection, the canceling will stop halfway. Note � The protect setting may not be effective on other equipment. � Even if you protect pictures in the built-in memory or a card, they will be deleted if the built-in
memory or the card is formatted.
� Even if you do not protect pictures on an SD Memory Card or an SDHC Memory Card, they
cannot be deleted when the card�s Write-Protect switch is set to [LOCK].
S [COPY]
You can copy the data of the pictures you have taken from the built-in memory to a card or from a card to the built-in memory.
1 2
Select [COPY] on the [PLAYBACK] mode menu. (P19) Move 3/4 to select the copy destination and then press [MENU/SET].
: All the picture data in the built-in memory are copied onto
the card at one time. > step memory. > step 3.
4.
: One picture at a time is copied from the card to the built-in
3 4
Move 2/1 to select the picture and then press [MENU/SET]. Move 3 to select [YES], and then press [MENU/ SET].
� If you press [MENU/SET] while copying pictures from the built-in
memory to the card, the copying will stop halfway.
� Do not turn the camera off at any point during the copying process.
5
Press [�] to return to the menu screen.
� Press [MENU/SET] to close the menu. � If you copy from the built-in memory to a card, all the pictures are copied and then the
screen automatically returns to the playback screen.
Note � If you copy picture data from the built-in memory to a card which does not have sufficient free
space, the picture data will only be copied halfway. We recommend using a card which has more free space than the built-in memory (about 50 MB). � If a picture exists with the same name (folder number/file number) as the picture to be copied in the copy destination when [ ] is selected, a new folder is created and the picture is copied. If a picture exists with the same name (folder number/file number) as the picture to be copied in the copy destination when [ ] is selected, that picture is not copied. (P95) � It may take time to copy the picture data. � Only pictures recorded with a Panasonic digital camera (LUMIX) will be copied. (Even if the pictures were recorded with a Panasonic digital camera, you may not be able to copy them if they were edited with a PC.) � DPOF settings on the original picture data will not be copied. Set the DPOF settings again after copying is finished.
