PANASONIC DMCFX50
Instrukcja Obsługi

Advanced

Taking Pictures using Burst Mode

Number of pictures recorded in burst mode
Burst speed (pictures/ second) 31 21 approx. 2 Number of recordable pictures (pictures)

1 Press and hold the burst mode button.
3

max. 6

max. 8

Depends on the remaining capacity of the card.

2 Move

/

to select a mode.
BURST SHOOTING

OFF HIGH SPEED LOW SPEED UNLIMITED SELECT SET
MENU

1 The burst speed is constant regardless of the transfer speed of the card. � The number of pictures indicated is when the shutter speed is faster than 1/60 and the flash is not activated. � If you set the ISO sensitivity (P73) to [ISO400], [ISO800] or [ISO1250] and then take pictures using burst mode, burst speed will become slower than the figures indicated above. � Since the shutter speed becomes slower in dark places, the burst speed (pictures/ second) may also become slower. � In simple mode [ ], the settings become as follows. [ ] appears on the screen. (P26) �[ �[ ENLARGE]: /Max. 6 pictures 4 6 /10 15cm]/[ E-MAIL]:

� You can also press the burst mode button to select.

3 Press [MENU/SET].
� You can also press the shutter button halfway to finish. � The menu screen disappears after about 5 seconds. At this time, the selected item is automatically set.

/Max. 8 pictures � When the burst mode setting is set to Unlimited � You can take pictures until the capacity of the card is full. � The burst speed will become slower halfway. The burst speed of a MultiMediaCard becomes even slower than that of an SD Memory Card or SDHC Memory Card. However, the exact timing of this depends on the number of recordable pictures and the card.

4 Take a picture.
� Hold down the shutter button fully to activate the burst mode.

47
VQT0Y19