JVC DM-JV600U
Instrukcja Obsługi

Main Features
Encoded to MPEG-2(ISO/IEC13818-2)

Thank you for purchasing this HDTV ENCODER DM-JV600U.

Input SMPTE292M(1080i/720p) standard HDTV digital serial video signal, encode it to MPEG-2(ISO/IEC13818-2) and output as DVB-ASI TS(Transformed Stream).

Supports SDI embedded Audio signal 2 channels
Encodes SMPTE299M standard SDI embedded Audio signal 2 channels to MPEG-1Layer 2 (ISO/IEC11172-3) and output as TS format.

Equipped with AES/EBU standard digital serial Audio input terminal
DM-JV600U is equipped with AES/EBU standard digital serial Audio input terminal. This unit is able to recieve audio signal from a unit which does not support with SDI embedded format.

Equipped with RS-232C terminal
Each feature can be set or operated on the front panel with FL display. Besides, this unit can be remote-controlled through the 9-pin connector on the rear panel.

1U EIA size can be mounted to the rack
If should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable program and in any literary, dramatic musical, or artistic work embodied therein. Owing to the compact size design, it can be mounted to the EIA rack.

3-2 Pull down feature
By converting to the SMPTE292M (1080i/720p) standard HDTV digital serial video signal, input movie film image that is 24 frame per one second can also be compressed to high quality using 3-2 Pull down feature.

Prior to important video/ audio recording, always perform a test recording to confirm that video/ audio is properly recorded. Please note that we will not provide compensation for contents of video/ audio recording due to improper video/ audio recording caused by defects when using this equipment.

Equipped with ASI output terminal
Video recording is possible by connecting to D-VHS digital video recorder from JVC that is equipped with ASI input terminal.

4