jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
Tekstowy podgląd strony 24 (kliknij aby zobaczyć)
DMR-EH58GN / DMR-EH58GC / DMR-EH58GCS
Item Mode name Description HDD READ VERIFY Measure of access time in READ VERIFY At start Inspection MODE of HDD.
FL display
Key operation (Remote controller key) Press [3] [2] in service mode. * When canceling the inspection mode while executing, do �forced power-off�. Method: Press [POWER] key more than 10 seconds.
The [*] sign is added every 20 seconds while inspecting. Two digits on the right side are the progress level of the inspection (The unit is %). Example on the way of inspection:
When HDD is OK after inspection:
(NG is displayed when error is excluding o ) (Transfer rate is calculated from the AV scanning result, and when it is less than 35Mbps, NG is displayed. )
$: [X] is displayed when seek time is over 270msec., there is error or transfer rate is NG. Position at $ is space when excluding those. ##: Number of data of over 100msec. and less than 270msec. When it is over 100, [99] is displayed. When the number is less than 5, we judge it normal. HDD Spin-up time The accumulation value of the Spin-up time of HDD is displayed. Spin-up time of HDD is displayed. (The unit of display is hour.) Press [3] [3] in service mode.