Setup Menus
DTS�
Choose whether to output by �Bitstream�, which processes DTS signals on other connected equipment, or to convert the signals to �PCM� (2ch) on the unit before output.
Status Messages
Choose whether to show status messages automatically or not. Perform steps 1�3 of �Accessing the Setup Menu� ( 55).
�, � to select �Display�, then �
After selecting �Digital Audio Output� ( 61, step 5).
�, � to select �DTS�, then
OK
�, � to select �Status Messages�, then OK �, � to select �Automatic� or �Off�, then OK
On-screen Language
Choose the language for these menus and the on-screen messages. Perform steps 1�3 of �Accessing the Setup Menu� ( 55).
�, � to select �Bitstream� or �PCM�, then OK
[Bitstream] When you have connected the unit to equipment displaying the DTS logo. [PCM] When you have connected the unit to equipment that doesn�t have the DTS logo.
You can select the kind of audio when recording from the unit�s DV in terminal ( 29). Perform steps 1�3 of �Accessing the Setup Menu� ( 55).
Select Audio Channel For DV Input
�, � to select �Display�, then � �, � to select �On-screen Language�, then OK
�, � to select �Audio�, then �
�, � to select �Select Audio Channel For DV Input�, then
OK
�, � to select �English�, �Español� or �Français�, then
OK
�, � to select �Stereo 1�, �Stereo 2� or �Mix�, then OK
[Stereo 1] [Stereo 2] [Mix]
�
Black Background (Analog)
Select whether to show the black (gray) background, normally shown when TV reception is poor. Perform steps 1�3 of �Accessing the Setup Menu� ( 55).
Records audio (L1, R1) Records added audio such as narration (L2, R2) subsequent to original recording. Records both Stereo 1 and Stereo 2.
�, � to select �Display�, then � �, � to select �Black Background (Analog)�, then
Incorrect settings can cause noise to be output which can be harmful to your ears and speakers, and audio will not be recorded properly on media such as mini discs.
OK
�, � to select �On� or �Off�, then
OK
62
RQT9056
