UNKNOWN DN-S1000
Instrukcja Obsługi

ENGLISH

8 SEAMLESS LOOP/HOT START/STUTTER
Seamless Loop/Hot Start/Stutter (A1, A2 buttons)
Operation display (refer to the section describing the display)

Stutter � A1 and A2 points can be also used for Stutter playback.

6
q, w, y t, y e, y r

t To enable stutter playback, push FLIP button for A1/A2 buttons, then � � display

FLIP
CLR

turns off. Press the FLIP button to switch between the Hot Start/Seamless Loop and Stutter modes. Clear the A1/A2 point

POWER TITLE

ON

OFF

FLIP
MEMO PRESET TIME CLR

A1
A

A2

B
EXIT/ RELOOP

y While pressing the FLIP/(CLR) button, push the A1 or A2 button to clear the corresponding A and B points. Or push the FLIP button for more than 1

NEXT TR. /B TRIM

QUICK JUMP

CONT. /SINGLE TRACK SEARCH MP3 SEARCH MODE

FAST SEARCH

TAP

ECHO /LOOP FLANGER

7

AUTO

sec to clear both A1 and A2 points at once. Quickly pressing the �FLIP� button first and then A1, A2 or B buttons will clear these points individually.

FILTER DISC MODE

Setting the A point (loading the Hot Start data) q Push the A1 or A2 button to set the A point and Hot Start data loading starts. A1 � A1 and A2 buttons can be A used separately for each Hot Start. � When an A point is set, the corresponding A button and � � display light and that button is set to the Hot Start mode. � The BPM is set independently for each Hot Start automatically. Starts Hot Start

� If the B button is pushed during

FLIP
CLR

A1
A

3-2

Seamless Loop playback or after EXIT playback, the B point moves to the point at which the button was pushed. � When the B point is set, the B and � � displays light. Playing Seamless Loops � When the B point for A1 is detected after playback started from A1 point, playback returns to A1 point with seamless. While A1 to B looping, B point for A2 ignored. � When the B point for A2 is detected after playback started from A2 point, playback returns to A2 point with seamless. While A2 to B looping, B point for A1 ignored. Exit/Reloop r In Seamless Loop playback, you can force exit from or return to the loop.
EXIT/ RELOOP

1

4

2

w When A1 or A2 button is pushed, Hot Start playback starts from the corresponding A point.

A1
A

Setting the B point for Seamless Loop e When the B button is pushed after setting the A point or after starting Hot start playback, the B point is set and Seamless Loop

B

5

3-1

EXIT: While the Seamless Loop playback, push the EXIT/RELOOP button to exit from loop. DN-S1000 continues playback after the B point. RELOOP: When the EXIT/RELOOP button is pushed after exit the loop, Seamless Loop playback resumes from the A point.

playback starts from the A point. � The B button works with respect to the A point operated before the B button was pushed.

13