Selecting a shot mark
Turn the search dial to align the asterisk cursor with the desired shot mark.
You can also use the following procedure.
1
With the shot mark list displayed, hold down the STOP button, and press the SET button. You can now select the shot mark types.
Entering virtual shot marks
During playback or search, hold down the ENTRY button, and press the MARK button.
2 3 4
Turn the search dial to select a shot mark type. Hold down the JOG button and turn the search dial to switch between ON (displayed) and OFF (not displayed). To return to the shot mark list, hold down the STOP button, and press the SET button.
%
6
0
9
)
p
MARK button ENTRY button
Deleting a shot mark from the list
To delete an individual shot mark Use the following procedure.
A virtual shot mark appears on the monitor as �VMARK xxx� (xxx is the number). This is not written to the tape. After entering a virtual shot mark, if you change the cassette or power the unit off, it appears in the list as the first shot mark of the next group read in.
%
6
0
9
)
p
Adding a memo mark (#)
Select the shot mark to which you wish to add the memo mark, then press the SET button. Repeat this operation to remove a memo mark.
3
1 2
2
2
1
In the shot mark list, select the shot mark to be deleted. Hold the MARK button down. While you hold down the button, an �X� appears after the selected shot mark number, indicating that it will be deleted. To delete more than one shot mark, while holding down the MARK button turn the search dial to select all of the shot marks.
Selecting the types of shot mark to be shown in the list
For each of the types of shot mark (recording start mark, shot mark 1, shot mark 2, and post mark) you can specify whether it is read in. In item G02 of the shot mark operation menu, set the required types to �ON�.
For details of the menu, see page 6-2.
Chapter 6 Shot Mark Function
3
With the MARK button held down, press the DELETE button. This deletes the shot marks which were marked by an �X�.
