Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 47 (kliknij aby zobaczyć)
You can also use the following procedure.
1
With the shot mark list displayed, hold down the STOP button, and press the SET button. You can now select the shot mark types.
To delete the entire list Hold down the DELETE button and press the LIST button. This deletes all shot marks from the list. This does not erase marks from the tape.
2 3 4
Turn the search dial to select a shot mark type. Hold down the JOG button and turn the search dial to switch between ON (displayed) and OFF (not displayed). To return to the shot mark list, hold down the STOP button, and press the SET button.
Erasing shot marks from the tape
To erase a shot mark, use the following procedure.
Note
Once you erase a shot mark from the tape, it cannot be read back in.
1
With no shot mark list displayed, hold the MARK button down for at least 2 seconds. The REC/ERASE indicator lights green, indicating that you can rewrite or erase shot marks.
Deleting a shot mark from the list
To delete an individual shot mark Use the following procedure.
%
2 3 4
Display the shot mark list. Turn the search dial to select on the list the shot mark you wish to erase. Press the DELETE button and MARK button simultaneously. During the erasure process the message �ERASE SHOT MARK� appears, and the REC/ERASE indicator lights red.
6
0
9
)
p
3
2
2
1
1 2
In the shot mark list, select the shot mark to be deleted. Hold the MARK button down. While you hold down the button, an �X� appears after the selected shot mark number, indicating that it will be deleted. To delete more than one shot mark, while holding down the MARK button turn the search dial to select all of the shot marks.
5
When the erasing operation is completed, hold down the MARK button for at least 2 seconds, to turn off the REC/ERASE indicator.
Chapter 5 Shot Mark Function
3
With the MARK button held down, press the DELETE button. This deletes the shot marks which were marked by an �X�.
