ONKYO DPS5.5
Instrukcja Obsługi

Troubleshooting
If you have any trouble using your DPS-5.5, check the following table for possible causes and remedies. If you still can�t resolve the issue yourself, please contact the dealer from whom you purchased this unit.
Symptoms Causes The power cord is not connected. The [Power] switch is set to Off. Can�t turn on the DPS-5.5? External interference is affecting the DPS5.5�s digital circuitry. Remedies Connect the power cord to a suitable wall outlet (page 23). Set the [Power] switch to On (page 23). Turn off the DPS-5.5, wait �ve seconds, then try turning it on again. If that fails, disconnect the power cord from the wall outlet, wait �ve seconds, reconnect it, then try turning it on again. Place the disc in the center of the disc tray (page 26). Remove the disc and clean it (page 11). Load a disc (page 26). Use only compatible discs (page 9). Load the disc the correct way up (page 26). Place the disc in the center of the disc tray (page 26). Remove the disc and clean it (page 11). Turn off the Parental Lock function (page 48). If the region number on the disc does not match the region number on the DPS-5.5, the disc can�t be played (page 51). Remove the disc and clean it (page 11). A little picture distortion may occur when using these functions. This is normal. Connect the DPS-5.5 directly to your TV (page 19). On your TV, select the input to which the DPS-5.5 is connected. Check the video cable and correct as necessary (page 19). Before you disconnect the power cord, set the DPS-5.5 to Standby by pressing the [Standby/On] button, and wait until �GOOD BYE� has disappeared from the display. Connect the DPS-5.5 directly to your TV (page 19).

The disc tray won�t close properly?

The disc is not centered in the disc tray. The disc is dirty. No disc is loaded. The disc cannot be played because it�s incompatible. The disc is upside down. The disc is not centered in the disc tray.

Can�t start playback? The disc is dirty. The disc uses parental lock and the Parental Lock function is on. The DVD-Video disc is intended for use in another region. DVD Player The picture distorts occasionally? The disc is dirty. You�re using the Fast Forward or Fast Reverse function. The DPS-5.5 is connected to your TV via a VCR or other video equipment and a copy-protection system is affecting the picture. The wrong input source is selected on your TV. The video cable is not connected properly. If there�s a power failure, or the power cord is disconnected inadvertently, any settings are lost. The DPS-5.5 is connected to your TV via a VCR or other video equipment and a copy-protection system is affecting the picture. Your TV doesn�t support progressive scanning. Chapters or tracks don�t play in the correct order? You are using repeat playback, program playback, or random playback.

Picture instability or noise?

No picture?

Settings are not saved?

Brightness is unstable or the picture is noisy?

Reset the DPS-5.5 to its initial settings (page 45). Select normal playback (pages 31�35).

57