FUNAI DPVR-6730
Skrócona Instrukcja Obsługi

QUICK SETUP GUIDE
Congratulations on your purchase of a FUNAI DVD/VCR. This Quick Setup Guide takes you through the first-time setup with simple instructions so you can enjoy exceptional audio and video quality as soon as possible. Please refer to the Owner's manual for detailed instructions. If you have read your instructions and still need assistance, call helpline at 0870-240-5807.

Clock Setting
Setting the Clock
This unit incorporates a 24-hour clock. The clock must be set for the Timer Recording function to operate correctly. 1) Press , then . 2) Press or to select �INITIAL�, then press
MENU TIMER SET UP INITIAL

Unless stated, all procedures described use the remote control.

INITIAL

.

CH TUNING CLOCK

Loading Batteries in the Remote Control

3) Press or to select �CLOCK� , then press . 4) Use , or to select current year, month, date, hour and minutes. 5) Press to start the clock.

CLOCK YEAR MONTH DAY HOUR MINUTE

2005 01 0 5 WE __ __

Note: � Press to go back to the item you want to correct during step 4). � Although seconds are not displayed, they begin counting from 00 when you exit by pressing . Use this feature to synchronize the clock with the correct time. � If the unit is unplugged or if there is a power failure for more than 30 seconds, you may have to reset the clock.

1) Open the battery cover.

2) Insert two R6 (AA) batteries, with the (+) and (-) ends in the correct positions.

3) Close the cover.

Channel Presetting Connecting to a TV
Channel Presetting

VHF/UHF MIXER
AERIAL RF OUT

WARNING!
UHF VHF

Never make or change connections with the power switched on. 1) Disconnect the antenna or cable from the TV and connect it to the AERIAL jack of the unit. 2) Connect the RF OUT jack of the unit to the antenna in jack of the TV using the supplied RF cable.

Tuning of broadcast channels not already preset in the unit can be performed in two ways.

Automatic Channel Preset
1) Turn on the TV and select the channel set as the video channel on the TV. 2) Press , then . 3) Press or . to select �CH TUNING� , . . to select �AUTO� , to select �INITIAL� , then press 4) Press or then press 5) Press or then press

MENU TIMER SET UP INITIAL

DVD
DIGITAL AUDIO OUT ANALOG AUDIO OUT S-VIDEO OUT

AERIAL

VHF/UHF MIXER

L
OPTICAL COAXIAL

VCR
DVD/VCR

AV2 (DECODER) AV1 (TV)

RF OUT

INITIAL CH TUNING CLOCK

R

Only for the model with OPTICAL jack to 21-pin scart jack

scart cable (supplied) RF cable (supplied)
(TV)

3) Connect the AV1 (TV) scart jack of the unit to the scart input jack of the TV using the supplied scart cable. 4) Plug in the TV and the unit.

CH TUNING AUTO MANUAL MOVE

to aerial socket
Scanning

PAL I_EN

1VMN20450 *****