KENWOOD DPX6030
Instrukcja Obsługi

CD/External disc control features
English
Fast Forwarding and Reversing Disc Play
Fast Forwarding Disc Play: Hold down on the ¢ button. Release your finger to play the disc at that point. Reversing Disc Play: Hold down on the 4 button. Release your finger to play the disc at the point.
NOTE

Disc Search (Function of disc changers) Search forward or backward through the discs in a disc changer.
Making a Reverse Disc Search: Press the DISC� button to display the desired disc number. Each time the button is pressed, the displayed disc number decreases by one. Play starts at the beginning of the displayed disc. Making a Forward Disc Search: Press the DISC+ button to display the desired disc number. Each time the button is pressed, the displayed disc number increases by one. Play starts at the beginning of the displayed disc.
NOTE

You cannot use reverse play between tracks depending on the model being connected. Instead, the reverse play function is canceled when it reaches the beginning of a track, at which point normal play will automatically resume.

Track Search
Search forward or backward through the tracks on the disc until you reach the one that you want to listen to. Making a Reverse Track Search: Press the 4 button to display the desired track number. Press once to search back to the beginning of the current track, twice to search back to the beginning of the previous track, and so forth. Play starts at the beginning of the displayed track number. NOTE (For disc changers) Pressing the 4 button while listening to track 1 will only search back to the beginning of that track. The reverse search is not "recycled" to the last track on the disc. Making a Forward Track Search: Press the ¢ button to display the desired track number. Press once to fast forward to the next track, twice to fast forward to the track after that, and so forth. Play starts at the beginning of the displayed track number. (For disc changers) You cannot make a forward track search when listening to the last track on a disc.
NOTE

"LOAD" is displayed when discs are being exchanged on the disc changer.

Direct Track Search

(Function of Remote) (See page 36)

Using the remote, directly input the track number that you want to listen to.

1 Using the number buttons on the remote, input the number of
the track that you want to listen to. The selected track number will blink in the display for 10 seconds. If you make no further input in the 10-second period, the number entry mode will automatically be canceled. 2 Press either the 4 or ¢ button while the track number is blinking. The track starts playing. Canceling Direct Track Search While It Is Operating: Press the 38 button.

� 18 �