Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Tekstowy podgląd strony 15 (kliknij aby zobaczyć)
Station Preset Memory
Putting a station in the memory.
Preset Tuning
Recalling the stations in the memory.
1 Select the band
Push the Control knob towards [FM] or [AM].
1 Select the band
Push the Control knob towards [FM] or [AM].
2 Select the frequency to put in the memory
Push the Control knob towards [4] or [¢].
2 Recall the station
Press the desired [1] � [6] button.
3 Put the frequency in the memory
Press the desired [1] � [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] � [6] button.
Frequency Step Setting
Changing the tuning frequency step. The original setting is FM band 50 kHz, and AM band 9 kHz.
1 Turn the power OFF
Press the [SRC] button for at least 1 second.
Auto Memory Entry
Putting a station with good reception in the memory automatically.
2 Switch the frequency step
While pressing the [1] and [5] button, press the [SRC] button. Release your fingers from the button after the display appears. The frequency step changes to FM band 200 kHz, and AM band 10 kHz.
� When the same operation is repeated, the frequency step returns to the original setting. � When the frequency step is changed, the frequencies in the memory are deleted.
1 Select the band for Auto Memory Entry
Push the Control knob towards [FM] or [AM].
2 Enter Menu mode
Press the [MENU] button for at least 1 second. "Menu" is displayed.
3 Select the Auto Memory Entry mode
Push the Control knob towards [FM] or [AM]. Select the "A-Memory" display.
4 Open Auto Memory Entry
Hold down on [4] or [¢] of the Control knob for at least 2 seconds. When 6 stations that can be received are put in the memory, Auto Memory Entry closes.
