jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
Tekstowy podgląd strony 16 (kliknij aby zobaczyć)
General Adjustment
Item
Screen Image
Adjustment Procedure 1) Receive NTSC Cross Hatch signal. 2) The Screen mode should be selected on Full mode. 3) When the vertical lines of the left and right side is not straight but distorted in the S type, adjust Side Pin S to correct the unbalanced vertical lines.
Side Pin S
Trapezoid
1) Receive NTSC Cross Hatch signal. 2) The Screen mode should be selected on Full mode. 3) When the screen shape is not rectangular but trapezoid, adjust Trapezoid to correct the unbalanced shape.
Side Pin Balance
1) Receive NTSC Cross signal. 2) The Screen mode should be selected on Full mode. 3) When both the left and right screen shape is not symmetrical but on one side, adjust Side Pin Balance to correct the unbalanced shape.
H Duty
1) There is no need to adjust. 2) Check if the value of data is "31".
Parallelogram
1) Receive NTSC Cross Hatch signal. 2) The Screen mode should be selected on Full mode. 3) When both the left and right screen shape is on one side, adjust Parallelogram to correct the unbalanced shape.
400Vp-p
H Focus Phase
1) There is no need to adjust, and check if the value of data is "32". 2) Check that the focus on the right and left side is clear.
