jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja bardzo czytelna. zawiera co potrzeba. Polecam
Tekstowy podgląd strony 20 (kliknij aby zobaczyć)
IC description
Pin 65 - GY Analog Green/Luma Input This input pin takes the AC-coupled analog compinent signal Green or Luma. The amplitude is 1.0V maximum at 75 Ohms and a couplign capacitor of 220nF. Internally, the DC-offset of the input signal is adjusted via the programmable internal clamping circuit. Connect to ground if not used.
Pin 66 - GNDGY Analog Ground This is the ground pin for the A/D converter of the Green or Luma signal and must be connected to ground. Note : All ground pins of the chip(i.e. 18,52,58,60,62,64, 66, and 68) must be connected together low rresistive. The layout of the PCB must take into consideration the need for a low-noise ground.
Pin 67 - RV Analog Red/V Chroma Input This input pin takes the AC-coupled analog component signal Red or V Chroma. The amplitude is 1.0V maximum at 75ohms and a coupling capacitor of 220nF. Internally, the DC-offset of the input signal is adjusted via the programmable internal clamping circuit. Connect to ground if not used.
Pin 68 - GNDRY Analog Ground This is the ground pin for the A/D converter of the Red or V Chroma signal and must be connected to ground. Note : All ground pins of the chip (i.e. 18,52,58,62,64,66, and 68) must be connected together low resistive. The layout of the PCB must take into consideration the need for a low-noise ground.
