SONY DSCH1
Instrukcja Serwisowa

Method for Copying or Erasing the Data in Internal Memory
The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.) Note 1: When replacing the SY-127 board, erase the data in internal memory of the board before replacement. Note 2: When replacing the SY-127 board or the IC381 on the SY-127 board, execute formatting and initialize the internal memory after replacement.

Method for copying the data in internal memory
Copy
Copies all images in the internal memory to a �Memory Stick�.
OK Cancel
See the following procedure. Cancels the copying.

1 Insert a �Memory Stick� having 32 MB or larger capacity. 2 Select [OK] with v on the control button, then press z. The message �All data in internal memory will be copied Ready?� appears. 3 Select [OK] with v, then press z. Copying starts.

Copying 102_COPY

� Use fully charged Nickel-Metal Hydride batteries or the AC Adaptor (not supplied). If you attempt to copy image files using batteries with little remaining charge, the batteries may run out, causing copying to fail or possibly corrupting the data. � You cannot copy individual images. � The original images in the internal memory are retained even after copying. To delete the contents of the internal memory, remove the �Memory Stick� after copying, then execute the [Format] command in Internal Memory Tool. � You cannot select a folder copied on a �Memory Stick�. � The setting of (Print order) marks is not copied even when you copy data.

Method for formatting the internal memory
This item does not appear when a �Memory Stick� is inserted in the camera. The default settings are marked with .

Format
Formats the internal memory.
Note that formatting irrevocably erases all data in the internal memory, including even protected images.

OK Cancel

See the following procedure. Cancels the formatting.

1 Select [OK] with v on the control button, then press z. The message �All data in internal memory will be erased Ready?� appears. 2 Select [OK] with v, then press z. The format is complete.

DSC-H1 6-2