jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Instrukcja jest OK. Schematy czytelne, opisane niektóre procedury.
Tekstowy podgląd strony 17 (kliknij aby zobaczyć)
DSC-P2
2-13.BARRIER UNIT
5 Ornamental fixed plate (A) 1 Switch on a power supply. 2 Push zoom button and transform the lens as shown below. 3 Switch off a power supply by taking out a battery or cut off a power supply from AC daptor. (without using camera�s power swich) 6 Two screws (M1.4 � 4.5) 7 Barrier unit
A
4 Pinch A portion with finger and fit a driver over a hollow.
[BARRIER OPERATION TEST METHOD]
After the barrier unit is replaced, check the following items with turning the power of the set ON/OFF. � The lens moves out and the barrier shutters open completely when the power is turned on. � The lens moves in and the barrier shutters close completely when the power is turned off. Checking condition is 1 downward 2 45° downward 3 horizontal 4 45° upward 5 upward; totally five positions and check three times for each position.
1 downward
2 45° downward
3 horizontal
4 45° upward
5 upward
The test needs to be performed only when the barrier unit is replaced. No performance of this test is needed when the lens is replaced.
