|
|
|
Kto jest w sklepie?
Sklep przegląda 5797 gości i
19 zarejestrowanych klientów |
|
Kategorie
|
|
Informacje
|
|
Polecamy
|
|
|
 |
|
|
Dla tego produktu nie napisano jeszcze recenzji!
 ;
Dobrej jakości skan - wkońcu mogłem poznać wszystkie funkcje tego odtwarzacza - polecam .
;
Gruba instrukcja - poprostu wszystko co potrzreba - polecam .
Selecting a flash mode
(No flash): The flash will not be used.
VGA FINE 101
VGA
101
98
98
SAF
250 F2.0
SAF
� If the menu is currently displayed, press MENU first to make the menu disappear. � The recommended distance using the flash is as follows (when [ISO] is set to [Auto]): Approx. 0.2 m (7 7/8 inches) to 3.5 m (11 feet 5 7/8 inches) � The flash fires twice. First pre-emission is to adjust the amount of flash light, and second emission is to shoot the image. � You can change the brightness of the flash using [ ] (Flash Level) in the menu settings (page 56). (When (Camera) is set to [Auto] in the menu, you cannot change the brightness of the flash.) � Because the shutter speed is slower under dark conditions when (Slow synchro) or (No flash) is selected, it is recommended that you use a tripod. � While the flash is being charged, the (flash charge) lamp flashes. After charging is completed, the lamp goes out. � This setting is maintained even when the power is turned off.
Shooting still images
2
, Center the subject in the frame. Press and hold the shutter button halfway down to focus on, then press the shutter button fully down.
The self-timer lamp (page 8) will flash, and you will hear a beeping sound. The image will be shot after approximately 10 seconds. To cancel the self-timer during the operation Press V ( ) on the control button again. The indicator disappears from the LCD screen.
� If you stand in front of the camera and press the shutter button, the focus and the exposure may not be correctly set.
, Set the mode switch to
, and
press v ( ) on the control button repeatedly to select a flash mode.
The flash mode has the following features. No indicator (Auto): The camera decides to use the flash based on lighting conditions. The flash will be used when there is not enough light or when shooting a subject against a light source. (Forced flash): The flash will be used regardless of the amount of ambient light. (Slow synchro): The flash will be used regardless of the amount of ambient light. In this mode, the shutter speed is slower under dark conditions, so you can clearly shoot a background that is out of the flash-lit area.
29
|
|
|
> |
|
